Everything starts at the foundation.

Get the basework right. From the beginning.

A solution for every start of a project.

Finesse and speed in the foundation work marks the craftsman. We’re here to assist you in setting the tone for the rest of the job.

Quality Control

Verify locations pre-pour

Concrete must be right the first time, every time. Verify that your pre-pour formwork, embed plates, anchor bots and other miscellaneous metals are in the precise design location in seconds for your cast-in-place concrete jobs with nothing more than a one-worker crew and Topcon’s self-leveling LN-100. You can then verify and document the exact location of finished work for your quality control workflow.

MAGNET Construct

App for positioning layout and as-built applications

Simple Workflow, Powerful Results

Verifying the precise locations of metal elements on the form can be slow, tedious and still hard to get exact. But with this solution, all that time and pain go away. Just set up, connect and  touch each point to measure. It's that simple. You can go from point to point to point, with no elapsed time setting up the measurement. And the results are millimeter-accurate.

Easy to Get Started

1

Set Up

Set up the instrument over a surveyed point in the plan, and let it self-level. 

2

Connect

Load the plan into the mobile app from the online MAGNET Enterprise account, and activate the link between the instrument and the 360-degree prism.

3

Measure

Set the tip of the prism pole at each point, and level up the pole. The instrument automatically follows the prism, and is constantly measuring and relaying that measurement back to the app.

Vertical Alignment

Vertical Reference Measurement

Using a reflectorless total station is by far the fastest, easiest, safest and most accurate method to assure that your building envelope is going up straight and square. Occupy a position that allows you to measure both base and top of any given structure, and shoot measurements of top and bottom until you get perfect vertical. And you can measure for square as well. Assure the quality of your jobs, the safety of your crew, and the health of your bottom line.

Leveling Footings and Forms

Leveling Footings and Forms

A single rotating laser can keep your whole project on the level. Set up in a safe location, and allow the laser to auto-level. Then use the grade rod to measure offsets from that rotating laser reference. Check footing depth as you go, set and check all your forms, and get them millimeter-precise.

LS-80 Laser Accessory

The LS-80 is a handheld laser receiver for most rotating lasers.

Upgrade to a sloping laser for more uses

Upgrade to a sloping laser for more uses

Upgrade to an RL-200, with either single-slope or dual-slope configuration. The sloping feature will allow you to tackle sloped trenches for sewer, or final grade on areas with mild slopes for drainage, and more. Of course, keep the slope set to zero for foundations and get dead-level every time.

A selection of rugged, accurate instruments for the building trades

The complete line-up of Topcon excavator systems deliver accurate, reliable guidance no matter your application.
Site connection brings management, visibility and speeds up processes. Bright full-color interfaces give
full touch-screen contol. Select 2D or 3D solutions to suit your needs and power your growth.

X-52x Excavator
X-52x Excavator

Excavation system for optimum positioning, cut, and safety.
X-53 Excavator
X-53 Excavator

Connected excavation control system for enhanced utility.
X-53i Excavator
X-53i Excavator

Machine control technology to guide precision excavation.
X-52 Excavator
X-52 Excavator

Rugged system with receiver and sensors for precision placement.

Topcon Total Station Solutions feature renowned optics and legendary durability combined with cutting-edge technology to maximize measurement productivity on a daily basis. With the most powerful reflectorless system available, you receive superb prism tracking and a built-in security standard.

GM-100
GM-100

Powerful manual total station with superior EDM
GM-50
GM-50

Dependable manual total station

Lasers, levels and theodolites should just work. Topcon instruments remove the guesswork with auto-levelling, auto-alignment and other features that let you work faster and more accurately.

RL-200
RL-200

Remote control slope laser
RL-H5 Series
RL-H5 Series

Self-leveling construction laser
RL-SV2S Rotating Laser
RL-SV2S Rotating Laser

The RL-SV2S is a rotating laser for several slope types.
LS-B110 and LSB110W Laser Receivers
LS-B110 and LSB110W Laser Receivers

The LS-B110 gives operators a remote view of grade information.
LS-B100 Laser Receiver
LS-B100 Laser Receiver

The LS-B100 is a value-priced laser receiver for machine control.
LS-B10 and LS-B10W Laser Receivers
LS-B10 and LS-B10W Laser Receivers

Topcon LS-B110 laser receivers work on rods or for machine control.
RL-SV1S
RL-SV1S

The RL-SV1S rotating laser for single slope is easy and durable.
RL-H5B
RL-H5B

This rugged, precise, long-range laser is reliable and low cost.

Insights & Testimonials

Segmented Success

The Future of the Construction Surveyor

...

Grand Paris: Building under the city

...

View More Insights

We've Got You Covered

Need more info?

We can email you additional product information. Your contact information will never be shared.

See it in action

Your local dealer can't wait to show you what we can do for your business.

View the event calendar