Loading firmware via Floader
- Download the latest firmware for the HiPer Ag
- Right Click the folder and select Extract All
- Open the FLoader program
- On the Device tab set Device Type to Receiver
Selecting RAM file
- Click on the Program tab at the top
- In the RAM file window, click on the Browse button
- Navigate to the folder that was created when you extracted from the zipped folder and select the file called main.ldp file
Selecting Flash File
- Click on the Program tab at the top
- In the Flash file window, you click on the Browse button
- Navigate to the same folder and select the ramimage.ldr file
Load Firmware Files
- Select the Load button to load the firmware and wait for the progress bar to get to 100%
- When completed you then need to update the power board
Receiver Power Board
- Go back to the Device tab
- Change the Device Type to Receiver’s Power Board
Loading Power Board Firmware
- Go back to the Program tab
- In the RAM file window, click on the Browse button
- Navigate to the same folder and select the powerboard.ldr file
- then select the Load button to load the firmware and wait for the progress bar to get to 100%
- The new firmware has now been loaded and you can close out of the Firmware Loader program.