TRU (Topcon Receiver Utility): Setup

Basic connection configurations and options for communication between TRU and GNSS receivers. 

Log in or sign up for myTopcon to view this page:

TRU (Topcon Receiver Utility): Setup

Connection Options: Serial

  • Select Device – Application Mode – Receiver Managing.
  • Select Device – Connect
  • Select Serial Port from the drop down menu.
  • Using the configuration button, select the correct COM Port the receiver is connected to on the PC and/or data controller 
  • Select Connect to connect to the receiver via serial port connection.

 

Connection Options: Bluetooth

  • Select Device – Application Mode – Receiver Managing.
  • Select Device – Connect
  • Select Bluetooth from the drop down menu.
  • Using the configuration button, select a previously used receiver or add a new receiver to connect to via Bluetooth. 
  • Select Connect to connect to the receiver via Bluetooth.

Connection Options: Network

  • Select Device – Application Mode – Receiver Managing.
  • Select Device – Connect
  • Select Network from the drop down menu.
  • Using the configuration button, select a previously used receiver or add a new receiver to connect to via Ethernet. 
  • Select Connect to connect to the receiver via Ethernet. 

Connection Options: USB

  • Select Device – Application Mode – Receiver Managing.
  • Select Device – Connect.
  • Select USB from the drop down menu.
  • Using the configuration button, select a receiver currently connected to the PC via USB.
  • Select Connect to connect to the receiver via USB.