Topcon GNSS USB Driver Installation

3 38
  • Connect the receiver to the computer via USB cable.
  • Open the Control Panel.
  • Click on Devices and Printers.
  • Scroll down if needed and click on Hiper_SR.
  • Right-click on Properties.
  • Click on the Hardware tab.
  • Click on Properties.
  • Click the General tab.
  • Click the Change settings box.
  • Click the Driver tab.
  • Click Update Driver.
  • Click on Browse my computer for driver software.
  • Browse to the location of the driver.
  • Select the correct driver for your computer, 64- or 32-bit.
  • Click Next.

 

  • Click Install this driver software.
  • The driver installation popup will open and show the progress of the installation.
  • The pop-up window will then show the driver has been successfully updated.
  • Click Close. The driver installation is complete.
  • You can now establish a USB connection from the computer to the receiver using TRU (Topcon Receiver Utility).