Sitelink3D v2: Using the Site Manager

Overview of the Site Manager in Sitelink3D v2

Log in or sign up for myTopcon to view this page:

Sitelink3D v2: Using the Site Manager

The Site Manager is available from the Sitelink3D v2 menu in the top left of the web portal.

 

In the Site Manager, you will see a list of all sites that are currently active. To toggle between active and archived sites, hit the Showing Active button in the upper left.

New sites can be created with the + New Site button in the upper right.

The active site will always be highlighted in orange. Selecting a site will either show a purple gear to modify the site's Settings or a green check mark to make that site Active.

The red icon will let you Archive the site. The blue icon shows Site Information.

You can also set filters to limit the sites that are shown.

Tapping on the Filter icon allows you to set multiple filters by the following:

  • Name
  • Owner Email
  • Cell Size
  • Data Center
  • Created At

The gear icon is for display Settings.

Here, you can change the max number of sites shown at a time from 100, 200, 500, and 1000.

You can also enable, hide, and rearrange fields as they are shown in the Site Manager. Available fields are:

  • Name
  • Owner Email
  • Created At
  • Data Center
  • Cell Size (disabled by default)
  • Identifier (disabled by default)