Pavelink: Jobsite - Thermal Mapper: Working with the TH-M1

TH-M1 uses tracks. Tracks are stretches of road that can cover one or more lanes. Each time the machine moves to another part of a project or a new project, a new track is started.

TH-M1 always starts from the list of tracks. By default, the list is empty.

Start a new track by tapping on the button + ADD NEW TRACK.

Tap  to toggle between the front camera and the rear camera.
As soon as a valid QR-code is detected, you are guided to the next steps. 

The TH-M1 app will download the configuration files for the TH-M1 hardware and will ensure the data will be stored at the right location.

The QR-code can be printed directly from the Pavelink website.

Enter the track reference. This name should reflect the jobsite, e.g., project code and/or description.

Enter the temperature cut-threshold value.

Any temperature lower than this number will be ignored. It is also used to detect the edge of the track.

Enter the asphalt type: typically SMA, HMA, etc. This could also be a mix code.

Enter the minimum and maximum processing temperature for the asphalt.

The target settings determine the colors used throughout the application.

Select the layer of the track and the lanes it covers by tapping on the texts.

This information will be part of the file name later, for easier identification.

Tap on the stop button  when the track is finished.

You will be asked to confirm.

The track data will automatically be stored in the Pavelink cloud.

Tracks are automatically uploaded to the Pavelink cloud.

You delete a track by tapping on the delete button  next to the track reference.

Use the delete button  at the bottom right to delete all tracks.