NT 8000i: Loadcell CAN Power Diagnostics

Load cell CAN power diagnostics

Log in or sign up for myTopcon to view this page:

NT 8000i: Loadcell CAN Power Diagnostics

Loadcell Interface LED's

  • Open the Loadcell Interface and check if there is a constant green power light on the bottom LED. If the light is solid green you have correct power. 
  • Also, confirm the CAN light is flashing red. If it is flashing red you likely have a load cell problem. If it is not flashing you could have a bad CAN connection to either the loadcell or the headunit.

Junction Box Input Power

  • Open the Type-C junction box and check the fuse. If the fuse is fine cofirm you have 12v coming into the box. If not, check cabling and main power supply.