This case is used for all necessary parts of your Intel® Falcon™ 8+ Drone - Topcon Edition
- Falcon™ 8+ UAV without payload
- Power supply units for charging the Intel® Powerpack batteries (optional) (6)
- Space for accessories, e.g. sun glasses
- Toolkit with spare propellers (see Figure below)
- Space for the payload when mounted directly onto the UAV. (For load security you must take the foam bolster inlet, which is supplied with the payload case.)
- Space for Intel® Powerpack batteries (shipped separately)
- Space for Independent Camera Control (ICC) gamepad (optional)
- Space for extra equipment, if any, which is not part of the System.
- Toolkit and spare parts
Intel® Cockpit Ground Control Station (GCS) Case**
- Intel® Cockpit GCS with mounted sun shield (for transporting the cockpit in the case, the sunshade should be arranged as shown to provide extra protection of the touchscreen tablet against scratches during transportation.)
- Additional space to store extra items, e.g. an extra power supply
- Additional space to store extra items, e.g. an extra power supply
-
Included in the case, but not shown:
- Shoulder harness, located underneath the sun shield protected touchscreen tablet.
Payload Case**
The payload of the Intel® Falcon™ 8+ UAS must be placed as shown. Make sure that it is placed conveniently inside the foam bolster.
The foam bolster cover (not shown) located on top of the payload, should be used to secure the payload when it is transported in the Intel® Falcon™ 8+ UAS case, while it is mounted onto the UAS.
**The images of the items above are for illustration purpose only, and the actual item(s) packed with your Intel® Falcon™ 8+ Drone - Topcon Edition may differ from the one(s) depicted here depending on, for example, which payload you ordered.
