Intel® Falcon™ 8+ Drone - Topcon Edition: Smart Batteries - Charging

Battery specifications:

  • Battery type: Intel® Powerpack™ Battery
  • Electric charge [mAh] 4000
  • Voltage standard [V] 14.8
  • Voltage fully charged [V] 16.8
  • Voltage lowest recommended (under load) [V] 14.0
  • No. of cells - 4

On the front panel of the battery, there is a sticker. An area is marked by a dot surrounded by a circle. This area has the function of a button.

The LEDs are integrated in the front panel of the battery. LED number/color from left to right:

  • 1 / red
  • 2 / yellow
  • 3 / green
  • 4 / green
  • 5 / green

The LEDs show the state/phase of charge of the battery.

Status of LED No:

1 2 3 4 5
Charging state
on - - - - 0% - 20%
on on - - - 20% - 40%
on on on - - 40% - 60%
on on on on - 60% - 80%
on on on on on 80% - 100%

 

Charging the Intel® Powerpack™ Battery:

To charge the Intel® Powerpack™ Battery, connect the supplied charging cable to the Intel® Powerpack™ Battery and to the supplied AC adapter. Connect the AC adapter to a wall socket. Charging will begin immediately.

During the charging process the current battery state and the progress of the charging process is indicated by the LEDs. As shown in the table above, the number of permanently lit LEDs represent the charging progress. Additionally, as the next higher LED begins flashing, the next charging step is not yet finished. The charging process can be interrupted any time by unplugging the battery and the AC adapter. When the charging process is finished and the full capacity of the battery is reached, all five LEDs will keep flashing simultaneously as long as the battery remains connected to the AC adapter.

When charging is finished, just unplug the battery and the AC adapter.