GLS-2000: WLAN Setup - Static IP (Android)

0 0

Android Static IP Setup

  • At the Home Screen go to Settings
  • With the scanner turned on you should see the SSID of GLS-2000_(serial number)
    • To see on the Network Settings on the GLS-2000 go to Config>Network Settings>WLAN

  • Touch and hold on the SSID of GLS-2000_(serial number)
  • Select Modify network config
  • Type in Password – 00(serial number)
  • Select Show advance options
  • Select Static
  • Change IP address to a number that is in the same family as the IP address on the GLS-2000
    • Example: Scanner is 192.168.111.250
    • Example: Tablet is 192.168.111.251
  • SAVE!
  • At the Home Screen go to VNC Viewer
  • In VNC touch the plus (+) sign in the lower right hand corner
  • Type in the IP address of the scanner.
    • Example: Scanner is 192.168.111.250
    • Example: Tablet is 192.168.111.251
    • To see on the Network Settings on the GLS-2000 go to Config>Network Settings>WLAN

  • Name the new connection
  • Touch Create
  • Touch Connect
  • Touch OK to make connection