DynaRoad: Troubleshooting

0 0

Material not moving

  • Check intersections
    • Material will not travel if there is not a path to follow
    • If intersection is one-way material cannot flow back the other direction
  • Check material types
    • Source type must match destination type
  • Check crushing plants
    • Make sure source types and crushed types match with destination types.
    • Check the quantity of each crushing plant.

 

Cut/fill doesn't match in Schedule mode

  • Check production rates
    • May need to change production rates to match or add a local stockpile to the cut.
  • Check timing
    • Make sure cut and fill are done at the same time or add a stockpile.
  • Check if material is hauled to disposal area instead of fill
    • Check timing production rates and suitabilities.
    • Check if disposal area has Must fill enabled.
  • Check crushing plants
    • Make sure source types and crushed types match with destination types.
    • Check the quantity of each crushing plant.
  • Create more borrow pits or disposal areas

 

Task timing problems

  • Make sure Schedule mode is active
  • Check task dependencies
    • Dependencies causes changes in one to affect the timing of other tasks.
    • Timing cannot be changed to break dependencies between other tasks.
  • Check crew and production rates
    • Tasks cannot be completed without resources available
    • Incorrect production rate coefficients can cause task to be done too slow or fast.
  • Check red flags
    • A red flag on a task shows a timing constraint violation. Move your mouse over the flag to see the reason.

 

Cannot insert a stockpile

Stockpile is only active in Schedule and Control modes

  • Change Project mode to Schedule mode or Control mode
  • Select the Insert menu
  • Select Stockpile
  • Continue procedure as with a Borrow pit or Disposal area

Using Help

  • Select the File menu
  • Hover the mouse over Help
  • Select View help from the sub-menu
  • Select the Search box
  • Type a keyword and press Enter
  • Select link to view desired help page

 

Accessing the Assistant

  • Type Assistant in DynaRoad Help search box
  • Select the link for ControlPlanning, or Scheduling assistant