AGI-4: Firmware Update Procedure

0 0

Firmware Update Procedure

  • Go to the Setup screen (via the wrench button in lower left corner).
  • Select System / GPS / Receiver / Firmware Upgrade and select the Green Check Mark to continue.
  • The update procedure will start automatically and will take a few minutes.
  • After the update, the receiver will automatically power cycle. 

Reset NVRAM

  • Go to the Setup screen (via the wrench button in lower left corner).
  • Log in as a dealer User / Access Level. Your local dealer will have the password
  • Select System / GPS / Advanced Configuration / Reset NVRAM and select the Yes to continue.
  • The NVRAM Reset procedure will start automatically and will take a few minutes.