3D-MC: Intelligent Compaction - As-Built Color Map Settings

  • As-Built map colors can be set to display specific criteria in the Roller Machine Builder
  • Seperate color settings can be defined for each individual as-built maps
  • Pass Count, Stiffness, and Temperature can all have independent color schemes
  • From the main screen select <View> from the main menu
  • Select <Display Options> from the Pop-Up menu
  • Select <As-Built Surface> 
  • The color/Offset screen will appear
  • In this screen the as-Built color map is displayed based on the highlighted option (in this case Pass Count)
  • Select the pass number to change the color
  • Select the desired color for the pass number
  • The color for the specific pass is now changed and will show as that color on the main screen as-built map.
  • The color map for Stiffness and Temperature can be changed in the same manner
  • There are two additional fields under these selections
  • Interval/Step is the range of the values with in each color block
  • Offset represents the center of the range of all the color blocks in the map