X-53X EXCAVATOR

Modular 3D Excavator System

  • Cut grade fast and accurately
  • Cut flat, vertical and 3D surfaces
  • Fully upgradeable
  • Real-time bucket tracking
  • Completely integrated GR-i3 receivers 

Войдите в систему или зарегистрируйтесь на myTopcon для просмотра этой страницы:

КОМПОНЕНТЫ

MC-X1

GR-i3 Integrated GNSS Receiver

TS-i3

GX-55

GX-75

LS-B10/10W

SL-100

СОПУТСТВУЮЩИЕ ТОВАРЫ

3D-MC Grade Control Software

УСТАРЕВШИЕ ПРОДУКТЫ

Sitelink3D

Краткие руководства

GR-i3: How to connect via Bluetooth to a Windows 7 PC

GR-i3: How to connect via Bluetooth to a Windows 7 PC

This article explains how to connect a GR-i3 via Bluetooth to a Windows 7 PC for use with Topcon Receiver Utility.

Просмотреть больше

MC-X1: Configuring Wi-Fi

MC-X1: Configuring Wi-Fi

This guide will explain how to set up Wi-Fi on the MC-X1.

Просмотреть больше

X-53x: Geometry calibration

X-53x: Geometry calibration

The following guide is an overview of the geometry calibration procedure.

Просмотреть больше

TRU (Topcon Receiver Utility): Connecting to GR-i3 antennas

TRU (Topcon Receiver Utility): Connecting to GR-i3 antennas

Connecting to GR-i3 antennas

Просмотреть больше

Automatic X-53x performance logging

Automatic X-53x performance logging

This guide covers the procedure to collect logs when the automatic excavator is not performing properly.

Просмотреть больше

3D-MC: Sites menu overview

3D-MC: Sites menu overview

An overview of the functionality of the Sites menu in 3D-MC

Просмотреть больше

X-53x Automatic Excavator: Joining a Sitelink3D v2 site

X-53x Automatic Excavator: Joining a Sitelink3D v2 site

In 3D-MC v15 for the X-53x automatic excavator, the user can pair their machine to a Sitelink3D v2 jobsite. From there, the user can work on tasks that are assigned by company admins, and real-time updates can be displayed back in the office.

Просмотреть больше

X-53x Automatic Excavator: Calibrating a bucket in 3D-MC v15.0.33

X-53x Automatic Excavator: Calibrating a bucket in 3D-MC v15.0.33

How to calibrate an excavator bucket with 3D-MC version 15.0.33

Просмотреть больше

Backing up and restoring Calibrations

Backing up and restoring Calibrations

This guide explains the process to back up and restore geometry and hydraulic calibrations for an automatic excavator system.

Просмотреть больше

Документы