GLS-2000: WLAN Setup - Static IP (iOS)

How to setup Apple iOS with a static IP addres to connect to the GLS-2000 via Wi-Fi connection

Войдите в систему или зарегистрируйтесь на myTopcon для просмотра этой страницы:

GLS-2000: WLAN Setup - Static IP (iOS)

iOS Static IP Setup

  • At the Home Screen go to Settings
  • Touch Wi-Fi
  • With the scanner turned on you should see the SSID of GLS-2000_(serial number)
    • To see on the Network Settings on the GLS-2000 go to Config>Network Settings>WLAN

  • Touch the “i” on the right side for the SSID of GLS-2000_(serial number)
  • Highlight the Static button
  • Type in IP address to a number that is in the same family as the IP address on the GLS-2000
    • Example: Scanner is 192.168.111.250
    • Example: Tablet is 192.168.111.251
  • Blue check mark show you are CONNECTED!
  • At the Home Screen go to VNC Viewer
  • In VNC touch the plus (+) sign in the upper right hand corner
  • Type in the IP address of the scanner.
    • Example: Scanner is 192.168.111.250
    • Example: Tablet is 192.168.111.251
  • Name the new connection
  • Touch Save
  • Touch Connect
  • Touch Connect to make connection