GLS-2000: WLAN Setup - Dynamic IP (Android)

How to setup an Android tablet with a dynamic IP addres to connect to the GLS-2000 via Wi-Fi connection

Log in of meld u aan voor myTopcon om deze pagina te bekijken:

GLS-2000: WLAN Setup - Dynamic IP (Android)

Android Dynamic IP Setup

  • At the Home Screen go to Settings
  • With the scanner turned on you should see the SSID of GLS-2000_(serial number)
    • To see on the Network Settings on the GLS-2000 go to Config>Network Settings>WLAN

  • Touch and hold on the SSID of GLS-2000_(serial number)
  • Select Modify network config
  • Type in Password – 00(serial number)
  • Select Show advance options
  • Make sure the IP setting is DHCP
  • SAVE!
  • At the Home Screen go to VNC Viewer
  • In VNC touch the plus (+) sign in the lower right hand corner
  • Type in the IP address.
  • Touch Create
  • Touch Connect
  • Touch OK to make connection