Programming the UR-1 for UHF
Create a machine profile in 3D-MC, and select the radio type of Topcon UR-1 (UHF).
Complete the machine builder.
The individual UHF channels must now be programmed in MCXConfig.
Navigate to MCXConfig > Network > UHF Channels.
Specify the channel number, frequency, and spacing.
Press Add to save the channel.
Repeat until all desired channels are programmed.
These channels can now be selected in 3D-MC.
Programming the UR-1 for FH915
Create a machine profile in 3D-MC, and select the radio type of Topcon UR-1 (FH915).
Complete the machine builder.
The FH915 settings can now be programmed in 3D-MC by going to Tools > Configure Radios.