Topcon GNSS USB Driver Installation

Process of installing Topcon USB driver to establish USB connection to GNSS receivers

7.0.3

Log in or sign up for myTopcon to view this page:

Topcon GNSS USB Driver Installation

  • Connect the receiver to the computer via USB cable.
  • Open the Control Panel.

7.0.3

  • Click on Devices and Printers.

7.0.3

  • Scroll down if needed and click on Hiper_SR.
  • Right-click on Properties.

7.0.3

  • Click on the Hardware tab.
  • Click on Properties.

7.0.3

  • Click the General tab.
  • Click the Change settings box.

7.0.3

  • Click the Driver tab.
  • Click Update Driver.

7.0.3

  • Click on Browse my computer for driver software.
  • Browse to the location of the driver.

7.0.3

  • Select the correct driver for your computer, 64- or 32-bit.
  • Click Next.

 

7.0.3

  • Click Install this driver software.

7.0.3

  • The driver installation popup will open and show the progress of the installation.

7.0.3

  • The pop-up window will then show the driver has been successfully updated.
  • Click Close. The driver installation is complete.
  • You can now establish a USB connection from the computer to the receiver using TRU (Topcon Receiver Utility).

7.0.3

 

7.0.3

 

7.0.3

 

7.0.3

 

7.0.3