3D-MC GRADE CONTROL SOFTWARE

Overview of GX-60 and GX-55 control boxes. 

How to navigate the "File" menu to properly manage the available data in any given project file. 

A few basic application steps to ensure a good day of grading

Best Practice Grading Tips

Suggestions for weekly grader maintenance

Suggestion and steps for weekly maintenance on 3D dozers (except mastless 3D-MC^MAX systems)

How to customize the view options of the main window. Check out this guide to see what features are available. 

How to customize the view options of the left and right windows. Check out this guide to see what features are available. 

How to customize the view options of the lower window. Check out this guide to see what features are available. 

How to customize the display options of the data on-screen. Check out this guide to see what features are available. 

When setting up the way 3D-MC switches between mmGPS transmitters, both the main and auxiliary receivers need to be set. Follow this guide to properly configure your system. 

How to configure LongLink Bluetooth on PS total station for LPS connection and machine control 

Installation instructions for Trimble SNR93x series radios on Topcon 3D machine control

A common tool used in excavator systems is to create a sloped surface from the control box of a machine. Using topo shots taken with the bucket, an operator can use these points to create a sloping surface that they can then dig to in automatics. Creating a surface from the control box eliminates the need for someone with a rover to come over and create a surface for the operator in the machine.

This article explains how to use MAGNET Field to copy a local coordinate system to 3D-MC.

Advanced valve settings in 3D-MC

In 3D-MC, under Project Layer, there is an Avoidance option which allows you to set audible and visual alarms when within a user-defined proximity of the data within a selected layer.

Offline activation of 3D-MC for Volvo excavator systems

Online activation of 3D-MC for Volvo excavator systems

This article explains how to install an external SATEL UHF radio on a Volvo 3D-MC excavator.

This article explains how to install an external SATEL FH915 radio on a Volvo 3D-MC excavator.

How to use the SATEL Configuration Manager to load firmware into the TR9 radio.

This article explains how to use the SATEL Configuration Manager to set up and change channels in the TR9 spread spectrum radio.

How to use the SATEL Configuration Manager to set up and change channels in the TR4 UHF radio