3D-MC GRADE CONTROL SOFTWARE

Overview of GX-60 and GX-55 control boxes. 

How to navigate the "File" menu to properly manage the available data in any given project file. 

A few basic application steps to ensure a good day of grading

Best Practice Grading Tips

Suggestions for weekly grader maintenance

Suggestion and steps for weekly maintenance on 3D dozers (except mastless 3D-MC^MAX systems)

How to customize the view options of the main window. Check out this guide to see what features are available. 

How to customize the view options of the left and right windows. Check out this guide to see what features are available. 

How to customize the view options of the lower window. Check out this guide to see what features are available. 

How to customize the display options of the data on-screen. Check out this guide to see what features are available. 

When setting up the way 3D-MC switches between mmGPS transmitters, both the main and auxiliary receivers need to be set. Follow this guide to properly configure your system. 

How to configure LongLink Bluetooth on PS total station for LPS connection and machine control 

Enabling GX-55 skins for simulation mode

How to create a temporary alignment from a selected polyline in 3D-MC

Creating lines from points in 3D-MC

A quick guide to verify visually that your Roadtec milling machine has automatics turned on in 3D-MC.

This quick guide is to show which settings to use in 3D-MC in the Cutting Head Control screen while 3D milling with a single mmGPS antenna.

This quick guide is to show which settings to use in 3D-MC in the Cutting Head Control screen while 3D milling with RD-MC.

This quick guide is to show which settings to use in 3D-MC in the Cutting Head Control screen while 3D milling with dual mmGPS antennas.

An overview of the functionality of the Sites menu in 3D-MC

In 3D-MC v15 for the X-53x automatic excavator, the user can pair their machine to a Sitelink3D v2 jobsite. From there, the user can work on tasks that are assigned by company admins, and real-time updates can be displayed back in the office.

How to calibrate an excavator bucket with 3D-MC version 15.0.33

This article explains the settings for 3D-MC when milling a crown road, where the milling drum exceeds the crown.

This guide explains how to use and program the UR-1 radio.

This article explains how to use MAGNET Field to copy a local coordinate system to 3D-MC.

In 3D-MC, under Project Layer, there is an Avoidance option which allows you to set audible and visual alarms when within a user-defined proximity of the data within a selected layer.

Online activation of 3D-MC for Volvo excavator systems

This article explains how to install an external SATEL UHF radio on a Volvo 3D-MC excavator.

How to use the SATEL Configuration Manager to load firmware into the TR9 radio.

This article explains how to use the SATEL Configuration Manager to set up and change channels in the TR9 spread spectrum radio.

How to use the SATEL Configuration Manager to set up and change channels in the TR4 UHF radio