Troubleshooting: No Position Data
No Position Data
- Ensure the sensors are connected and calibrated to the surface information.
- Verify the sensors’ values are within their working range.
- Confirm the sensor is functioning properly.
Troubleshooting: Sensor Not Connected
Sensor Not Connected
- Error occurs when no sensor is present.
- Confirm that all sensors are connected and receiving power.
- Verify that the 3D junction box is connected properly.
- Confirm that the sensor light on the MC-R3 is illuminated.
GPS receiver not connected
GPS receiver not connected
- Check connection to the MC-R3.
- Confirm connection and IP setting within 3D-MC and Windows.
- Inspect the connector attached to the control box for damage.
Poor Machine Performance
Poor Machine Performance
- Check machine hydraulic calibration.
- Confirm proper sensor position, Machine builder settings and measurements.
- Inspect Surface data for errors.
- Confirm 3D-MC and components are functioning properly.