HiPer HR: LongLink RTK Rover configuration using TRU

0 0

Rover Configuration:

  • Open TRU and connect to Rover in Reciever Managing Mode.
  • Connect to receiver.
  • Click on Receiver Settings.
  • Click on Ports.
  • Click the Input mode drop down for LongLink Client A
  • Click on RTK RTCM 3.x
  • Click Tracking & Positioning.

 

  • Click the Positioning tab.
  • Click RTK fixed
  • Click Extrapolation.
  • Click OK.

 

  • Click Bluetooth.
  • Click the ellipsis button.
  • Select the Base Reciever.

Check to see if you are Communicating with the Base reciever

  • Click Status.
  • The Base and Rover are communicating.
  • Disconnect from TRU.