HiPer HR: LongLink RTK Base configuration using TRU

0 0

Base Configuration:

  • Open TRU and connect to Base in Reciever Managing Mode.
  • Connection parameters
  • Click on Receiver Settings.
  • Click on Ports.
  • Click on the Bluetooth tab.
  • Click on LongLink Service A.
  • Click the Output Mode dropdown list.
  • Click on RTK RTCM3.x
  • Click OK.
  • Click OK.
  • Click the X button to close the window.
  • Click on Tracking & Positioning.
  • Click on the Base tab.
  • Click the Antenna Type drop down.
  • Select the reciever being used.
  • Click the ellipsis button under Antenna Reference Port.
  • Click Get from receiver.

 

  • Click Stop.
  • Click OK.

 

  • Click OK .
  • Click Disconnect.