- There are two options for sensing direction using the C63 IC system
- A backup relay can be plugged into the system, similar to a dozer, and detect a reverse alarm.
- Rollers generally move in straight lines, so the GPS position is adequate
- When using the optional Relay Kit, the sensor should be plugged into the number 2 controller connector
- In most IC applications the Relay is not required.
- When connected to an MC-i3 or MC-i4, reverse detection defaults to <ON> under the <Direction> option in the Web Interface
- Using IC without reverse detection, it is necessary to turn off this option by selecting <Edit> and unchecking the Reverse Switch selection box
- If using GPS position only for direction, a hot key is available in the event that the machine loses orientation
- It is not required to toggle this hot key every time the machine moves forward and back
- Only if the machine loses orientation due to bad satellite signal or setting for an extended about of time
- The Hot Key can be activated by selecting <View> in the main menu from the main screen
- In the dropdown menu select <Display Options>
- in the next menu select the <Shortcuts> option
- From the Shortcut screen locate <Toggle Direction>
- Highlight the selection and <Modify> to turn on
- The Hot Key will now be available on the main screen
7.0.3
7.0.3
7.0.3
7.0.3
7.0.3
7.0.3
7.0.3