FC-5000 FIELD CONTROLLER

How to establish MAGNET Enterprise and hardware connections in MAGNET Field.

Setup Robotic and GNSS occupy locations in MAGNET Field. Set the RTK base position, define a robotic occupy point and backsight orientation. 

How to properly create a new job in MAGNET Field 

You watched the Pro Series Webinar about getting the maximum out of your FC-5000? Here´s how you install MAGNET Office Tools on your FC-5000.

Field procedure to adjust a Traverse using MAGNET field software.

How to configure and connect a GT and RC-5 in Pocket 3D

How to collect support information and create a Support Info ZIP file

This article is about Windows 11 compatibility with Topcon data controllers.

Windows Bluetooth pairing for devices using SPP

Some examples of devices using an SPP include GPS receivers, EM sensors, and some barcode/RFID scanners.

This article explains how to pair a device using an SPP to a Windows device with Bluetooth. It also outlines how to locate an assigned COM port number.

This article explains how to install MAGNET Field on an FC-5000/FC-6000.

Upgrading your data collector? This guide shows the steps for copying the configurations library to another data collector.