SmoothRide Control: Applications

Application of paving routines using the techniques and settings shown elsewhere. 

Connectez-vous ou inscrivez-vous à myTopcon pour consulter cette page :

SmoothRide Control: Applications

Start Paving or Milling

Sample of screen:

Application

 

Application

  • The lower status window will display the Design thickness on top and the Estimated thickness on the bottom.
  • The Set point buttons can be used to make small corrections to the mat thickness or cutting depth.

 

Application 2D Joint Match and Slope

Application 2D Joint Match and Slope

  • During the paving or milling process 2D options to joint match or reference an object are available by selecting 2D Elevation
  • Slope can be achieved one of two ways. 2D slope using a slope sensor can be used by selecting 2D Slope
  • Working from design slope using a sonic tracker and GPS, select the 3D Slope