MAGNET Construct: Logging raw data

This article explains how to log raw GNSS data using MAGNET Construct.

Connectez-vous ou inscrivez-vous à myTopcon pour consulter cette page :

MAGNET Construct: Logging raw data

With MAGNET Construct version 5.2, it is now possible to set up raw data logging sessions.

From the first screen in the receiver configuration menu, check the Post Processing box.

In the Receiver menu, select PP Settings.

Here it is possible to define how to name the log files: Default date and time or User defined.

Define where the file should be recorded: Receiver or Controller.

Define the logging interval: 1 sec, 5 sec, or 15 sec, for example.

Define how the logging is started: Manual or Automatic.

Select the minimum number of SVs to track for the session.

When in the Topo screen, two additional icons will be available in the bottom left: an Information button and Start/Stop button.

When logging is started, the green + icon will change to a red x. 

To stop logging, press the red x. A dialog box will be displayed to confirm the action.

If the raw data file is set to be stored on the controller, the location will be in the following folder:

  • MAGNET Construct/RawData

Raw data logged to the receiver is stored in the usual manner.