MAGNET Collage: Remodeling in Autodesk Revit using Families

You can use existing Revit families to remodel your project, for instance the building walls

Log in or sign up for myTopcon to view this page:

MAGNET Collage: Remodeling in Autodesk Revit using Families

  • You can use existing Revit families to remodel your project, for instance the building walls
  • Double click the Floor plan acting as base of the walls
  • Navigate to the Architecture tab and click Wall in the Build group
  • Choose a wall family and trace the building by picking the corners of the point cloud

 

  • Go to the 3D view and select the walls (select one wall and hit TAB to select all connected walls
  • In Properties set Top Constraint to Up to level: Roof

 

  • Double click the Floor plan acting as base of the Roof
  • Navigate to the Architecture tab and select Roof in the Build group
  • Go to the 3D view
  • Choose Pick Walls in the Draw tab and select the walls
  • Select the left and right sketch line and uncheck the box for Define slopes
  • Finish the sketch by selecting the green checkmark

 

  • Select the walls
  • Select Attach Top/Base in the Modify Wall group
  • Select the roof to extend the walls