3D-MC Volvo Dig Assist: Inserting a SIM card

How to insert a SIM card inside the Co-Pilot tablet

Connectez-vous ou inscrivez-vous à myTopcon pour consulter cette page :

3D-MC Volvo Dig Assist: Inserting a SIM card

Detach Co-Pilot

Carefully take the Co-Pilot tablet out of its bracket with two hands. Two cables are still connected.

Detach the Co-Pilot by turning the connector with care.

Place the Co-Pilot on a surface where you can operate without causing damage to it.

You will need two hex keys.

Detach the whole rear housing. Watch out for the wires!

Unscrew the protection cover for the SIM card.

Insert the SIM card into the slot.

Take a picture of it to keep its iccid in your files. You will need this information to activate the card with the network operator.

Be sure that in the parameters of this card, there is no SIM code needed.