POCKET 3D

This guide will go over setting up the MR-2 with an RE-S1 and SRL-35 using...

This guide goes over the Sitelink3D features inside of Pocket3D.

If a job does not need a full localization to a surveyor's control points, a single point localization can be performed.

Create a TIN surface from points or lines in Pocket 3D that can be directly transferred to a machine.

Streamline your field data collection by creating Quick Codes in Pocket 3D.

Learn to orient and display grid lines in Pocket 3D.

Learn different ways to edit points in Pocket 3D.

In Pocket 3D, record attributes of topo shots, auto-topo, and stakeout measurements to a user-defined *.TXT or *.CSV file in your field collector.

Easily offset points in Pocket 3D, using either the Calc wizard or the contextual menu.

Use the Auto-topo function in Pocket 3D to speed up collection of large areas, either by walking or using a motorized vehicle.

Windows Bluetooth pairing for devices using SPP

Some examples of devices using an SPP include GPS receivers, EM sensors, and some barcode/RFID scanners.

This article explains how to pair a device using an SPP to a Windows device with Bluetooth. It also outlines how to locate an assigned COM port number.

How to create arcs in Pocket 3D.

This quick guide shows you the steps for loading a JSON receiver configuration file.

This quick guide shows you the steps for exporting the receiver configuration to a JSON file. This allows you to restore the receiver to a pre-set configuration.

This guide explains the process of setting the antenna offset to zero for your base receiver inside of MAGNET Field. This is a useful tool when the rover receiver may not recognize the antenna profile of a given base receiver. 

Create and compare two surfaces to calculate the volume of a stockpile in Pocket 3D