MAGNET FIELD

How to properly create a new job in MAGNET Field 

How to establish MAGNET Enterprise and hardware connections in MAGNET Field.

Setup Robotic and GNSS occupy locations in MAGNET Field. Set the RTK base position, define a robotic occupy point and backsight orientation. 

How to import data from MAGNET Enterprise into MAGNET Field.

How to perform a multi-point GNSS localization using MAGNET Field. 

This guide will help install and update MAGNET field onboard for a Total station by simply using a thumb drive and untethered version of the executable installation file, no internet access required.

How to create custom codes for points, lines and areas. It will also explain how to export a code library as a *.XML file.

How to set up a custom code library as a default or global code library. The codes inside this default library will be available in each and every new job.

Field procedure to collect a Traverse using MAGNET field software.

This guide will go over setting up the MR-2 with an RE-S1 and SRL-35 using...

Measure one or more prisms repeatedly and use those measurements to detect changes in the position of the prisms.

Field procedure to adjust a Traverse using MAGNET field software.

Configuring Topcon Receiver and Depth Finder to survey 

This article explains how to calculate volumes between 2 DTMs.

This article explains how to use the surface offset functionality in MAGNET Field.

This article explains how to create a surface from linework.

This guide is about creating a new stockpile surface from scratch in MAGNET Field with Survey > Surface.

This article explains how to use MAGNET Field to configure a Topnet Live Skybridge Pro network rover with PPP via L band.

This article explains how to use MAGNET Field to configure a Topnet Live Skybridge Pro base and rover with PPP via L band.

This article is about using MAGNET Field to configure a Topnet Live Starpoint Pro PPP via L band.

Correct prism settings in MAGNET Field for surveying and setting out.

How to collect support information and create a Support Info ZIP file

This article explains how to use MAGNET Field to copy a local coordinate system to 3D-MC.

MAGNET Field allows you to easily calculate areas just by selecting surveyed linework. 

This article explains how to create a polyline and how to stake linework in real time.

This article explains how to open the stakeout setting, edit the distance tolerance, and show the compass.

This article explains how to create point lists and how to stakeout with point lists.

Is your prism not on the list? No problem. This quick guide explains how to add a custom prism in MAGNET Field.

Learn how to use a custom projection in MAGNET Field.

This guide shows you the steps for downloading *.TPS files from a GR-5 removable SD card. 

Windows Bluetooth pairing for devices using SPP

Some examples of devices using an SPP include GPS receivers, EM sensors, and some barcode/RFID scanners.

This article explains how to pair a device using an SPP to a Windows device with Bluetooth. It also outlines how to locate an assigned COM port number.

This quick guide shows you the steps for outputting NMEA messages from your rover receiver.

Have a depth finder but don't see depths yet? This quick guide shows you the steps for displaying depths while connected to a depth finder.

This article explains how to use MAGNET Field to configure a Topnet Live Skybridge Pro network rover with PPP via NTRIP.

This article explains how to use MAGNET Field to configure a Topnet Live Starpoint Pro PPP via NTRIP.

This is general information about Topnet Live Starpoint and Skybridge.

This quick guide shows you the steps for loading a JSON receiver configuration file.

This quick guide shows you the steps for exporting the receiver configuration to a JSON file. This allows you to restore the receiver to a pre-set configuration.

This article explains how to install MAGNET Field on an FC-5000/FC-6000.

Learn how to create a custom datum and ellipsoid in MAGNET Field.

This step-by-step guide shows you how to activate MAGNET Field via the online activation method. This will resolve the Security not enabled message.

This guide explains the process of setting the antenna offset to zero for your base receiver inside of MAGNET Field. This is a useful tool when the rover receiver may not recognize the antenna profile of a given base receiver. 

This article explains the steps to create the New Zealand Survey Report.

Performing firmware updates is part of maintaining field equipment. This step-by-step guide shows you how to update firmware on the GT Series. 

Upgrading your data collector? This guide shows the steps for copying the configurations library to another data collector. 

This quick guide shows you the steps for troubleshooting a network RTK rover in MAGNET Field. This is for users in the field who are having trouble connecting a rover to a GNSS network such as Topnet Live.