TRU (Topcon Receiver Utility): MC-i3 and MC-i4 Connection Parameters

Steps to connect to MC-i3 and MC-i4 receivers with TRU (Topcon Receiver Utility) to configure the GNSS board.

Acceda o inscríbase en myTopcon para ver esta página:

TRU (Topcon Receiver Utility): MC-i3 and MC-i4 Connection Parameters

Connecting to an MC-i3 and MC-i4 with TRU

There are two ways to connect TRU to an MC-i3 or MC-i4:

  • Connected to a control box (e.g. GX-55).
  • Connect to a PC via programming cable (PN 1001269-01).

The connection parameters vary depending on which method is used.

The MC-i4 modem cannot be connected to with TRU. You must use the web interface or MCXConfig.

Connecting to an MC-i3 and MC-i4 With a Control Box

Receiver Managing

  • Connect Using: Serial
  • Port Name:COM 1.
    • For the main GNSS board, leave secondary receiver unchecked.
    • For the auxiliary GNSS board, check secondary receiver, Serial D.
  • Press Connect.

Modem Managing

  • Connect Using: Serial
  • Port Name:COM 1.
    • Receiver Port: Internal Modem, Serial B.
  • Press Connect.

 

Connecting to an MC-i3 and MC-i4 With a PC

Receiver Managing

  • Connect Using: Serial
  • Port Name:COM 1.
    • For the main GNSS board, use the cable labled Serial 1.
    • For the auxiliary GNSS board, use the cable labled Serial 2.
  • Leave secondary receiver port unchecked
  • Press Connect.

Modem Managing

  • Connect Using: Serial
  • Port Name:COM 1.
    • Receiver Port: Internal Modem, Serial B.
  • Use the cabled labeled Serial 1.
  • Press Connect.