Topcon GNSS USB Driver installation

Process of installing Topcon USB driver to establish USB connection to GNSS receivers

Acceda o inscríbase en myTopcon para ver esta página:

Topcon GNSS USB Driver installation

  • Connect the reciever to the computer via USB cable.
  • Open the Control Panel.
  • Click on Devices and Printers.
  • Scroll down if needed and click on Hiper_SR.
  • Right-click on Properties.
  • Click on the Hardware Tab.
  • Click on Properties.
  • Click the General Tab.
  • Click the Change Settings Box.
  • Click the Driver Tab.
  • Click Upload Driver.
  • Click on Browse my computer for driver software.
  • Broswe to the location of the Driver.
  • Select the correct diver for your computer, 64- or 32-bit.
  • Click Next.

 

  • Click Install this Driver.
  • The Driver installation popup will open and show the progress of the installation.
  • The Pop up window will then show the driver has been successfully updated.
  • Click Close, the driver installation is complete.
  • You can now establish a USB connection  from the computer to reciever using TRU ( Topcon Reciever Utility).

 

7.0.3

 

7.0.3

 

7.0.3

 

7.0.3