Topcon’s GR-3 receiver, the next generation of system design and tracking technology, is now available with a completely new digital UHF radio system utilizing DSP technology. This technological advancement delivers far greater reliability and performance than older analog UHF technology of the past and sets new standards for performance, accuracy and innovative design.
GPS receiver design has taken a quantum leap forward with the new GR-3. It starts with 72 “universal” channels that support all current and planned satellite positioning signals. Then there’s the micro-tuned, precision antenna capable of receiving all G3 positioning signals with Topcon’s patented center-mount radio antenna for superior signal tracking and interference reduction.
The GR-3 receiver incorporates a unique dual communication system, featuring both cellular and radio technology. Offering a 915 MgHz Spread Spectrum internal Tx/Rx* or Digital UHF radio, the GR-3 can serve roles as either an RTK base or rover system. And by utilizing the optional internal GSM/GPRS/CDMA modem communication system via the easily accessible cellular SIM card slot, a user can extend their range far beyond radio capability or utilize both receivers as rover systems off a fixed base station or a network system.
*915 MgHz Spread Specturm radio technology is not approved for use in Europe or Asia
It is the World’s First G3 (GPS, Glonass, Galileo) capable GNSS receiver, and a clear indication of
Topcon’s technology leadership in the satellite positioning industry!
- Digital UHF or Spread Spectrum radio
- Advanced Rugged System Design
- Optional Internal GSM/GPRS/CDMA Cellular Communication
- 72 Universal Tracking Channels
- RTK 10Hz position and raw observation, 20Hz optional
- Bluetooth Wireless Technology
- G3 Satellite Tracking (GPS, Glonass, Galileo)
Rugged magnesium I-beam construction for unbeatable strength & durability, the GR-3 also boasts easily accessible SD card memory and dual hot-swappable batteries for unlimited continuous operation. Internal Bluetooth wireless technology provides GR-3 users with the advantages of a completely cable-free system with any Topcon field controller.
Topcon's GR-3 with its wide array of advanced design features is truly a revolutionary receiver– two steps ahead of any other receiver technology available!
|Signal||GPS/GLONASS L1/L2/L5 C/A and P Code & Carrier, Gallileo E 1/2/5a and L1, WAAS/EGNOS|
|Cold Tracking||<30 seconds|
|Warm Tracking||<5 seconds|
|Static||3mm +.5ppm horizontal, 5mm + .5ppm vertical|
|RTK/Kinematic||10mm + 1 ppm horizontal, 15mm + 1 ppm vertical|
|DGPS||> .25m Post Processing, < .50m Real time|
|Enclosure||Magnesium I-beam Housing, Waterproof construction|
|Dimensions||W: 158 x D: 158 x H: 234.5 mm|
|Operating Temperature||-20 to +50 degrees Celsius|
|Storage Temperature||-20 to +35 with batteries, -40 to +75 without batteries degrees Celsius|
|Internal Battery||2 Li-Ion, 3900mAh, 7.2V|
|Operating Time||14 Hours|
|External Power||1 port(s)|
|Battery Charger||Dual Li-Ion "Smart" charger with optional Alkaline battery pack. Charger doubles as external power source|
|Bluetooth||Bluetooth standard 1.2|
|Key and LED|
|Key||Two keys, Power ON/Off and Function Start/stop data logging, switch to extended information mode|
|LED||6, one for receiver status, data recording indication, TX/Rx, Bluetooth status and 2 for indication of each battery charge level|
|Internal Memory||Environmentally protected, removable SD™ media card slot|
|External Power Port||1 port(s), DC Jack Type A ODU|
|External Antenna Connector||reverse tnc/bnc modem connector|
|SD Card Slot||1 slot, Memory I/O|
|Serial Port||1 port(s), RS232 ODU|