Features
LS-B10W Systems
The new LS-B10W and RD-10W system adds to the productivity of your job site. Both utilize magnetic mountings and when used in conjunction with a Topcon laser level, the combination and productivity is unbeatable.
LS-B10W Features:
- Small, Lightweight design
- 270º detection
- Rugged, Waterproof design
- Wireless Support and CAN support
- Magnetic mounts for use anywhere
The LS-B10W mounts on the part of the machine that you wish to keep on grade. It sends its leveling information wirelessly back to the RD-10W remote display that is mounted in the cab where the operator can better see the grade information. All this functionality with a low cost price too!
Not limited to machine mounting only, the LS-B10 and LS-B10W sensors have an optional grade rod mount bracket as well.
Specifications
| Specifications | |
| Detector | |
| Detector Length | 4.72 ", 120 mm |
| Detector Angle | 270° |
| Display | |
| On-Grade Zone (LED) | .08, .24, .47, 1.18 inches, 2, 6, 12, 30 mm |
| LED Grade Indicators | Red (up arrow) , Green (–), Red (down arrow) |
| LED Grade Patterns | 5 grade, 2 lost beam, 1 low battery, 1 level alert |
| LCD | one side |
| LCD Grade Indicators | 11 channels, on-grade + 5 gradual triangles |
| LCD Backlight | yes(wo/Auto) |
| Low Battery Indicator | LED pattern & LCD symbol |
| Transmitter Low Battery Ind. | LCD symbol |
| Transmitter Level Indicator | LCD symbol |
| Physical | |
| Mountings | built-in magnet mount, grade rod clamp attachement |
| Dual Sided Magnet Mount | yes |
| Buttons | 4 (1power, 1mode, 1buzzer, 1BT) |
| Beeper | dual tone; loud and light |
| Ports | CAN ,Bluetooth |
| Connectors | one for CAN (M12) |
| Housing | ABS |
| Batteries | 3 AA dry cell Alkaline, no rechargeable |
| Battery Life | Approximately 20 Alkaline hours, N/A rechargeable hours |
| Environmental | |
| Operating Temperature | -20 to +50 degrees Celsius |
| Storage Temperature | -30 to +60 degrees Celsius |
| Humidity | 95% 40°C 48H |
| Vibration | JIS A 8101 |
| Electrical | EN55022 Class A, IEC801-2, IEC801-3 |
| Waterproof | IP66 |
| Other | |
| Optional Remote Grade Display | yes; RD-10W, via BT |
| Power Save and Laser-on | power save in after 5 min with no beam detection, power back upon Laser |
| Auto Shutoff | after 30 minutes |
| Mode to turn off LED | yes |
| Bluetooth | yes |
Literature
Brochures
 |
||||||||||
 |
||||||||||
|
||||||||||
