Topcon's 3D-MC2 shatters the final 3D automation production barrier - SPEED!
Four times more productive than a manual dozer
Think about it: what would it mean to your company's bottom line to have a single dozer doing the work of two 3D dozers at speeds and smoothness comparable to a grader; to save time and money on every pass and every job? With 3D-MC2, it's not just possible, it's guaranteed!
See how Topcon's 3D-MC2 can save you money with these ROI Calculators.
So revolutionary, it's reshaping traditional machine roles
3D-MC2 will drastically change the role your dozer plays on a typical site, in some cases eliminating the need for a grader. It will also allow you to make more efficient use of your dozer. Along with speed increases, 3D-MC2 means fewer passes resulting in much more work done in less time. Less time equals less fuel and less machine wear. Most importantly, it means your dozer can spend more time making you money in another location or on other jobs.
How it Works
|3D-MC2 utilizes Topcon's GX-60 control box, GNSS antenna, MC-R3 receiver and new 3D-MC2 sensor and pairs them with advanced new controlling software to provide position updates up to 100 times per second. The MC2 sensor combines a gyro, compass and inertial sensor to measure the X, Y & Z position as well as the roll, pitch, yaw and acceleration of the dozer.|
If it sounds like rocket science, it's because in many ways it is. But your operator's won't find it any more difficult to use than the MC systems they're already familiar with. In fact, if they've used the competition's systems, they'll find Topcon's 3D-MC2 a whole lot easier to use!
GX-60 - the World's easiest-to-use operator's interface
Topcon's G63 and Z63 3D grade control systems feature the most advanced Operator interface available, Topcon's GX-60 touch sensitive control box. Light and compact with a full-color LCD touch sensitive screen, Topcon's GX-60 is a fully functioning Windows® computer that provides the operator with real-time grade information and control. Constructed of a strong cast housing and sealed internals, the GX-60 will be a refreshingly simple alternative to other operator interfaces.
GX-60 control box features include:
MC-R3 – Machine Control Receiver 3
Topcon's MC-R3 is the heart of Topcon's 3D-MC system. Providing either solid brackets for permanent mounting or magnetic mounting for portability, the MC-R3 contains all of the GNSS receivers, radios, and controllers in a single "built to last" housing. A built-in MINTER panel provides status lights and function keys for easy performance verification and system checks. The MC-R3 also features an Ethernet port, increased processing power over the previous generation box, and additional valve drivers to account for the widest array of machine compatibility.
|Supply Voltage||10-30 Volts|
|Operating Temperature||-20 to 60 Celsius|
|Water Proof||MIL STD 810D Method 506 or IPX6|
|Valve Type|||Sink, Source, Servo, Solenoid, Danfoss|
|Valve Driver Over Current Protection||Yes|
|Display||640x840 Color VGA with enhanced brightness|
|LED Displays||Grade Indicators|
|Data/Memory Port||Compact Flash & USB|
|Operating System||Windows XP|
|Compatible Add-on Kits|
3D-MC² Testimonial with Graystone Construction.
3D-MC² Testimonial with Gord's Contracting.
3D-MC² Testimonial with SCI.
3D-MC² Testimonial with Ronald Franks Construction discussing a side-by-side comparison with Accu-Grade.
3D-MC² Testimonial with Brantford Engineering and Construction.
3D-MC² Testimonial with MC2 T.J. Lambrecht Construction.
3D-MC² Testimonial with Tri-County Construction.
3D-MC² Testimonial with CDC Contracting.
3D-MC² Testimonial with Dagmar Construction.
3D-MC² Testimonial with Kapp Contractors.
Lee-Mar testimonial on 3D-MC².